Follow the steps below to complete device enrollment when demonstrating personal devices in the Cisco ISE demonstrations.

Depending on the software version of your device, the steps below may vary.

Scenario Credentials

The table below contains the scenario credentials that will be needed to complete device enrollment.

Table 1.         Scenario Credentials

Scenario / Vertical	Username	Password	Access Level	Connections Center Webpage
Healthcare	doctor	C1sco12345	Tier 1 – Full	http://health.dcloud.cisco.com
Healthcare	nurse	C1sco12345	Tier 2 – Limited Access	http://health.dcloud.cisco.com
Education	dean	C1sco12345	Tier 1 – Full Access	http://edu.dcloud.cisco.com
Education	professor	C1sco12345	Tier 2 – Limited Access	http://edu.dcloud.cisco.com
Federal	captain	C1sco12345	Tier 1 – Full Access	http://federal.dcloud.cisco.com
Federal	officer	C1sco12345	Tier 2 – Limited Access	http://federal.dcloud.cisco.com
Corporate	manager	C1sco12345	Tier 1 – Full Access	http:/corp.dcloud.cisco.com
Corporate	employee	C1sco12345	Tier 2 – Limited Access	http:/corp.dcloud.cisco.com
N/A	itadmin	C1sco12345	Full Demo Access

 

Apple iOS Devices

Follow the steps below to enroll Apple iOS devices.

1. Connect to the wireless network.
2. Go to Settings > Wi-Fi and connect to the network dCloud-Guest.
3. Open a website to be redirected to the Guest Portal to perform onboarding.
4. Open your built-in browser (Apple Devices: Safari, Windows: IE, Android: Chrome, we also support Firefox on Apple & Windows PCs)
5. Attempt to connect to your Demo Scenario page (ex: corp.dcloud.cisco.com) and you will be redirected to the Guest portal.

Be sure that the website you attempt to open uses HTTP, as HTTPS redirection is not supported in this demo.

1. On the guest portal, login with the user credentials for your selected scenario, as shown in Table 1.

Figure 1.        Self-Provisioning Portal Login

7. Click Accept to accept the AUP.

Figure 2.        Acceptable Use Policy

8. Click Start on the BYOD welcome page

Figure 3.        BYOD welcome page

9. Fill out the device information and click continue

Figure 4.        Device information page

10. Click Launch Apple Profile and Certificate Installers Now

Figure 5.        Apple Profile and Certificate Installer

11. On the Install Profile screen click Install to install the digital certificate for ise.dcloud.cisco.com

Figure 6.        Install the profile for ise.dcloud.cisco.com

12. Click Install on the Warning message that pops up

Figure 7.        Certificate warning

13. Click Done on the profile installed screen

Figure 8.        Profile installed screen

14. Click Install once again on the Install Profile screen to install the profile service, then click Install Now to verify

Figure 9.        Install Profile screen

 The first profile installation installs the ISE CA root certificate, while the second profile installation installs the individual device certificate and the wireless settings needed to connect to the secure network

Figure 10.      Install Profile verification

15. Click Done on the profiled installed screen

Figure 11.      Profile Installed screen

16. You are redirected to the Success page. Go to Settings > Wi-Fi and connect to network Demo_Registered.

Figure 12.      BYOD Success page

17. Open Safari and enter the Connections Center Webpage that corresponds to your selected scenario (Table 1).

 

Android Devices

Some Android devices require an SD card to store security certificates. Please be aware that some Android devices might not work with this demonstration. Android is open source across cellular carriers and device vendors. Some vendors update their code more frequently than others. Compatibility with all devices cannot be guaranteed.

Follow the steps below to enroll Android devices.

1. Go to Settings > Wi-Fi and connect to the network dCloud_Guest.
2. Launch the default Android web browser and access the Connections Center Webpage for your selected scenario as shown in Table 1. Accept any HTTPS warnings if necessary.
3. Login with the username and password for your selected scenario. You are redirected to the self-provisioning page.

Figure 13.      Self-Provisioning Portal Login

4. Click Accept to accept the AUP.

Figure 14.      Acceptable Use Policy

5. Fill out the device information and click Continue.

Figure 15.      Device Information Page

6. Click Get Cisco Network Setup Assistant Now and install this App if not already installed. Ensure you are logged into the Play Store and download the application.  You may also close you web browser and use the Google Play Store application on your device to download the application.  If using a Pattern or Pin lock on your device, you may be prompted for this information to proceed.

If you have trouble with the download from within the demo environment, it is recommended you download the Cisco Network Setup Assistant via another network connection. (i.e. cellular, or Wi-Fi). Since Android is an open platform, we cannot account for all variations of the product.

Figure 16.      Google Play Store App Installer

7. Open Network Setup Assistant and click Start.  Wait for your Android to be provisioned and joined to the correct network.

Figure 17.      Cisco Network Setup Assistant

Mac OSX Workstations

1. Connect to the wireless network.
2. Click the wireless icon at the top of the desktop and connect to the network dCloud-Guest.
3. Open a website to be redirected to the Guest Portal to perform onboarding.
4. Open your built-in browser (Apple Devices: Safari, Windows: IE, Android: Chrome, we also support Firefox on Apple & Windows PCs)
5. Attempt to connect to your Demo Scenario page (ex: corp.dcloud.cisco.com) and you will be redirected to the Guest portal.
6. If you are prompted with a certificate warning, click continue

Be sure that the website you attempt to open uses HTTP, as HTTPS redirection is not supported in this demo.

7. On the guest portal, login with the user credentials for your selected scenario, as shown in Table 1.

Figure 18.      Self-Provisioning Portal Login

8. Click Accept to accept the AUP.

Figure 19.      Accept the AUP

9. Click Start on the BYOD welcome page

Figure 20.      BYOD welcome page

10. Fill out the device information and click continue

Figure 21.      Device information page

11. You are brought to the install page. The Cisco Network Setup Assistant will automatically begin downloading in the background.  When it is done, open your downloads folder in finder and launch the cisco_network_setup_assistant.dmg

Figure 22.      Launch cisco_network_setup_assistant.dmg from the Downloads folder

12. Double click the Cisco Network Setup Assistant icon.  You may be prompted with a warning that “Cisco Network Setup Assistant” is an application downloaded from the internet. Click Open on this warning to launch the application

You may need to change security settings in OSX in order to run the Cisco Network Setup Assistant application. By default, OSX will only allow you to install applications from Apple. If you get an error that the Cisco Network Setup Assistant cannot be run, you likely need to change security settings.  To do this go to System Preferences then Security & Privacy. At the bottom, in the section labeled Allow apps downloaded from: select the Anywhere radio button

Figure 23.      Cisco Network Setup Assistant dmg image

Figure 24.      OSX Application Warning

13. Click Start in the Network Setup Assistant. Click Continue on the verify certificate popup if necessary

Figure 25.      Cisco Network Setup Assistant
Figure 24.      Verify Certificate

14. Enter your local computer credentials and click OK. These are the same credentials you use to login to your Mac. You may need to enter your credentials twice during this process, depending on your version of OSX due to security changes in OSX.

Figure 26.      Configuration profile tool verification

15. Click Exit on the network setup assistant after it successfully completes

Figure 27.      Cisco Network Setup Assistant success page

16. OSX should automatically switch you to the dCloud-Registered network. Verify you are now connected to the dCloud-Registered network
17. Open Safari and enter the Connections Center Webpage that corresponds to your selected scenario (Table 1).

Windows Workstations

You must use the default Windows wireless client for this demo.

1. Connect to the wireless network.
2. Click the wireless icon and connect to the network dCloud-Guest.
3. Open a website to be redirected to the Guest Portal to perform onboarding.
4. Open your built-in browser (Apple Devices: Safari, Windows: IE, Android: Chrome, we also support Firefox on Apple & Windows PCs)
5. Attempt to connect to your Demo Scenario page (ex: corp.dcloud.cisco.com) and you will be redirected to the Guest portal.
6. If you are prompted with a certificate warning, click continue

Be sure that the website you attempt to open uses HTTP, as HTTPS redirection is not supported in this demo.

7. On the guest portal, login with the user credentials for your selected scenario, as shown in Table 1.

Figure 28.      Self-Provisioning Portal Login

8. Click Accept to accept the AUP.

Figure 29.      Accept the AUP

9. Click Start on the BYOD welcome page

Figure 30.      BYOD welcome page

10. Fill out the device information and click continue

Figure 31.      Device information page

11. The Cisco Network Setup Assistant will be downloaded.  If you are prompted, save the file NetworkSetupAssistant.exe to your Downloads folder
12. Launch the NetworkSetupAssistant.exe installer that was downloaded. Click Run on any security warnings
13. Click Start and proceed through any certificate warning messages

Figure 32.      Cisco Network Setup Assistant
Figure 33.      Certificate Warning
Figure 33.      Certificate warning message

14. Click Exit on the network setup assistant after it successfully completes

Figure 34.      Cisco Network Setup Assistant success page

15. Windows should automatically switch you to the dCloud-Registered network. Verify you are now connected to the dCloud-Registered network
16. Open IE or Firefox and enter the Connections Center Webpage that corresponds to your selected scenario (Table 1).